استانداردهای مرتبط با صنایع نفت ، گاز و پتروشیمی

1	ANSI/AWS	A1.1-89	Metric Practice Guide for the Welding Industry
2	ANSI/AWS	A2.4-98	Standard Symbols for Welding, Brazing, and Nondestructive Examination
3	ANSI/AWS	A3.0-94	Standard Welding Terms and Definitions
4	ANSI/AWS	A5.2-92	Specification for Carbon and Low Alloy Steel Rods for Oxyfuel Gas Welding
5	ANSI/AWS	A5.01-93	Filler Metal Procurement Guidelines
6	ANSI/AWS	A5.1-91	Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
7	ANSI/AWS	A4.2-91	Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Austenitic-Ferritic Stainless Steel Weld Metal
8	ANSI/AWS	A4.3-93	Standard Methods for Determination of the Diffusible Hydrogen Content of Martensitic, Bainitic, and Ferritic Steel Weld Metal Produced by Arc Welding
9	ANSI/AWS	A5.6-84	Specification for Covered Copper and Copper Alloy Arc Welding Electrodes
10	ANSI/AWS	A5.4-92	Specification for Stainless steel Electrodes for Shielded Metal arc Welding
11	ANSI/AWS	A5.3-91	Specification for Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
12	ANSI/AWS	A5.11-90	Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
13	ANSI/AWS	A5.12-92	Specification for Tungsten and Tungsten Alloy Electrodes for Welding and Cutting
14	ANSI/AWS	A5.13-80	Specification for Solid Surfacing Welding Rods and Electrodes
15	ANSI/AWS	A5.14/A5.14M-97	Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
16	ANSI/AWS	A5.9-93	Specification for Bare Stainless Steel Welding Electrodes and Rods
17	ANSI/AWS	A5.10-92	Specification for Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods
18	ANSI/AWS	A5.8-92	Specification for Filler Metals for Brazing and Braze Welding
19	ANSI/AWS	A5.7-84	Specification for Copper and Copper Alloy Bare Welding Rods and Electrodes
20	ANSI/AWS	A5.18-93	Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding
21	ANSI/AWS	A5.17/A5.17M-97	Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding
22	ANSI/AWS	A5.16-90	Specification for Titanium and Titanium Alloy Welding Electrodes and Rods
23	ANSI/AWS	A5.15-90	Specification for Welding Electrodes and Rods for Cast Iron
24	ANSI/AWS	A5.24-90	Specification for Zirconium and Zirconium Alloy Welding Electrodes and Rods
25	ANSI/AWS	A9.1-92	Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases
26	ANSI/AWS	A5.19-92	Specification for Magnesium alloy Welding Electrodes and Rods
27	ANSI/AWS	A5.32/A5.32M-97	Specification for Welding Shielding Gases
28	ANSI/AWS	A5.31-92	Specification for Fluxes for Brazing and Braze Welding
29	ANSI/AWS	A9.2-92	Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases
30	ANSI/AWS	A5.30-97	Specification for Consumable Inserts
31	ANSI/AWS	A5.29-80	Specification for Low Alloy Steel Electrodes for Flux Cored Arc Welding
32	ANSI/AWS	A5.26-91	Specification for Carbon and Low Alloy Steel Electrodes for Electrogas Welding
33	ANSI/AWS	A5.25-91	Specification for Carbon and Low Alloy Steel Electrodes and Fluxes for Electroslag Welding
34	ANSI/AWS	B2.1.005-90	Standard Welding procedure specification (WPS) for gas metal arc welding of austenitic stainless steel (M-8 or P-8), 10 through 18 gage, in the as- welded condition, with or without backing
35	ANSI/AWS	B2.1-84	Standard for welding procedure and performance qualification
36	ANSI/AWS	B1.10-86	Guide for the Nondestructive inspection of welds
37	ANSI/AWS	B1.11-88	Guide for the visual inspection of welds
38	ANSI/AWS	B2.1.001-90	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel, (M-1/P-1, group 1 or 2), 3/16 through 3/4 inch, in the As welded condition, with backing
39	ANSI/AWS	B2.1.003-90	Standard Welding procedure specification (WPS) for Gas metal arc welding of galvanized steel, 10 through 18 gage, in the as-welded condition, with or without backing
40	ANSI/AWS	B2.1.004-90	Standard Welding procedure specification (WPS) for Gas metal arc welding of carbon steel (M-1, Group 1), 10 through 18 gage, in the as-welded condition, with or without backing
41	ANSI/AWS	B2.1.002-90	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of carbon Steel, (M-1/P-1, Group 1 or 2), 3/16 through 7/8 inch, in the as-welded condition, with or without backing
42	ANSI/AWS	B2.1.009-90	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of austenitic stainless steel (M-8 or P-8), 10 through 18 gage, in the as- welded condition, with or without backing
43	ANSI/AWS	B2.1.008-90	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of carbon steel, (M-1, group 1), 10 through 18 gage, in the as-welded condition, with or without backing
44	ANSI/AWS	B2.1.007-90	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of galvanized steel, 10 through 18 gage, in the as-welded condition, with or without backing
45	ANSI/AWS	B2.1.006-90	Standard Welding procedure specification (WPS) for Gas metal arc welding of carbon steel to austenitic stainless steel (M-1 to M-8 or P-8), 10 through 18 gage, in the as-welded condition, with or without backing
46	ANSI/AWS	B2.1.011-91	Standard Welding procedure specification (WPS) for Shielded metal arc welding of galvanized steel, 10 through 18 gage, in the as-welded condition, with or without backing
47	ANSI/AWS	B2.1.012-91	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1, group 1), 10 through 18 gage, in the as-welded condition, with or without backing
48	ANSI/AWS	B2.1.013-91	Standard Welding procedure specification (WPS) for Shielded metal arc welding of austenitic stainless steel (M-8/P-8), 10 through 18 gage, in the as-welded condition, with or without backing
49	ANSI/AWS	B2.1.010-90	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of carbon steel to austenitic stainless steel (M-1 to M-8 or P-8), 10 through 18 gage, in the as-welded condition, with or without backing
50	ANSI/AWS	B2.1.015-91	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of Aluminum,(M-22 or P-22), 10 through 18 gage, in the as-welded condition, with or without backing
51	ANSI/AWS	B2.1.014-91	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel to austenitic stainless steel (M-1 to M-8 or P-8), 10 through 18 gage, in the as-welded condition, with or without backing
52	ANSI/AWS	B2.1-8-023-94	Standard Welding procedure specification (WPS) for Shielded metal arc welding of austenitic stainless steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As Welded Condition
53	ANSI/AWS	B2.2-91	Standard for Brazing Procedure and Performance Qualification
54	ANSI/AWS	B2.1-8-025-94	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding followed by Shielded metal arc welding of austenitic stainless steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As Welded Condition
55	ANSI/AWS	B2.1-8-024-94	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding of austenitic stainless steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch thick, As Welded Condition
56	ANSI/AWS	B2.1-1-016-94	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E7018, As Welded or PWHT Condition
57	ANSI/AWS	B4.0-92	Standard Methods for Mechanical Testing of Welds
58	ANSI/AWS	B2.1-1-026-94	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010(Vertical Downhill) Followed by E7018, As Welded or PWHT Condition
59	ANSI/AWS	B2.1-1-021-94	Standard Welding procedure specification (WPS) for Gas Tungsten Arc Welding followed by Shielded metal arc welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2 and E7018, As Welded or PWHT Condition
60	ANSI/AWS	B2.1-1-020-94	Standard Welding procedure specification (WPS) for 75% Ar/25% CO2 Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E70T-1 and E71T-1, As Welded or PWHT Condition
61	ANSI/AWS	B2.1-1-022-94	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010(Vertical Uphill) Followed by E7018, As Welded or PWHT Condition
62	ANSI/AWS	B2.1-1-027-95	Standard Welding procedure specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch thick, E71T-11, As Welded Condition
63	ANSI/AWS	B2.1-1-019-94	Standard Welding procedure specification (WPS) for CO2 Shielded Flux Cored Arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E70T-1 and E71T-1, As Welded Condition
64	ANSI/AWS	B2.1-1-018-94	Standard Welding procedure specification (WPS) for Self-Shielded Flux Cored Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E71T-8, As Welded Condition
65	ANSI/AWS	B2.1-1-017-94	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010, As Welded or PWHT Condition
66	ANSI/AWS	B2.1-1-204-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch thick, E6010(Vertical Downhill Root with the Balance Vertical Uphill), As Welded Condition, Primarily Pipe Applications
67	ANSI/AWS	B2.1-1-203-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch thick, E6010(Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
68	ANSI/AWS	B2.1-1-201-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch thick, E6010(Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
69	ANSI/AWS	B2.1-1-202-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch thick, E6010(Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications
70	ANSI/AWS	B2.1-1-205-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010(Vertical Uphill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications
71	ANSI/AWS	B2.1-1-208-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
72	ANSI/AWS	B2.1-1-206-96	Standard Welding procedure specification (WPS) for Shielded metal arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, E6010(Vertical Downhill) Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications
73	ANSI/AWS	B2.1-1-207-96	Standard Welding procedure specification (WPS) for Gas Tungsten Arc welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
74	ANSI/AWS	B2.1-1-209-96	Standard Welding procedure specification (WPS) for Gas Tungsten Arc welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
75	ANSI/AWS	B2.1-1-210-96	Standard Welding procedure specification (WPS) for Gas Tungsten Arc welding with Consumable Inserts of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
76	ANSI/AWS	B2.1-1-211-96	Standard Welding procedure specification (WPS) for Gas Tungsten Arc welding with Consumable Inserts Followed by Shielded metal Arc Welding of carbon steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch thick, INMs-1, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications
77	ANSI/AWS	C2.16-92	Guide for Thermal-Spray Operator Qualification
78	ANSI/AWS	C1.1-66	Recommended Practice for Resistance Welding
79	ANSI/AWS	C2.14-74	Corrosion Tests of Flame-Sprayed Coated Steel, 19-Year Report
80	ANSI/AWS	C1.3-70	Recommended Practices for Resistance Welding Coated Low Carbon Steels
81	ANSI/AWS	C2.2-67	Recommended Practices for Metallizing with Aluminum and Zinc for Protection of Iron and Steel
82	ANSI/AWS	C2.18-93	Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites
83	ANSI/AWS	C5.5-80	Recommended Practices for Gas Tungsten Arc Welding
84	ANSI/AWS	C5.4-93	Recommended Practices for Stud Welding
85	ANSI/AWS	C5.6-89	Recommended Practices for Gas Metal Arc Welding
86	ANSI/AWS	C5.7-89	Recommended Practices for Electrogas Welding
87	ANSI/AWS	C5.10-94	Recommended Practices for Shielding Gases for Welding and Plasma Arc Cutting
88	ANSI/AWS	C4.2-90	Operator's Manual for Oxyfuel Gas Cutting
89	ANSI/AWS	C4.3-83	Operators Manual for Oxyfuel Gas Heating Torch Operation
90	ANSI/AWS	C5.3-91	Recommended Practices for Air Carbon Arc Gouging and Cutting
92	ANSI/AWS	C5.1-73	Recommended Practices for Plasma-Arc Welding
93	ANSI/AWS	C3.8-90	Recommended Practices for Ultrasonic Inspection of Brazed Joints
94	ANSI/AWS	C3.3-80	Recommended Practices for Design, Manufacture, and Inspection of Critical Brazed Components
96	ANSI/AWS	C6.1-89	Recommended Practices for Friction Welding
97	ANSI/AWS	C3.2-82	Standard Method for Evaluating the Strength of Brazed Joints in Shear
98	ANSI/AWS	C7.1-92	Recommended Practices for Electron Beam Welding
99	ANSI/AWS	D8.7-88	Recommended Practices for Automotive Weld Quality Resistance Spot Welding
100	ANSI/AWS	D10.4-86	Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
101	ANSI/AWS	D8.8-89	Specification for Automotive Frame Weld Quality Arc Welding
102	ANSI/AWS	D10.6-91	Recommended Practices for Gas Tungsten Arc Welding of Titanium Pipe and Tubing
103	ANSI/AWS	D10.4-86	Recommended Practices for Welding Austenitic Chromium-Nickel Stainless Steel Piping and Tubing
104	ANSI/AWS	D9.1-90	Sheet Metal Welding Code
105	ANSI/AWS	D8.9-97	Recommended Practices for Test Methods for Evaluating the Resistance Spot Welding Behavior of Automotive Sheet Steel Materials
106	ANSI/AWS	D3.5-93	Guide for Steel Hull Welding
107	ANSI/AWS	D1.4-98	Structural Welding Code Reinforcing Steel
108	ANSI/AWS	D1.3-89	Structural Welding Code Sheet Steel
109	ANSI/AWS	D8.5-66	Recommended Practices for Automotive Portable-Gun Resistance-Spot Welding on Electrode and Force Recommendations for Two and Three Loose Metal Thicknesses
110	ANSI/AWS	D3.6-93	Specification for Underwater Welding
111	ANSI/AWS	D3.7-90	Guide for Aluminum Hull Welding
112	ANSI/AWS	D1.2-90	Structural Welding Code Aluminum
113	ANSI/AWS	D1.1-98	Structural Welding Code Steel
91	ANSI/AWS	C5.2-83	Recommended Practices for Plasma Arc Cutting
95	ANSI/AWS	C3.7-93	Specification for Aluminum Brazing
114	ANSI/AWS	D10.12-89	Recommended Practices and Procedures for Welding Low Carbon Steel Pipe
115	ANSI/AWS	D1.2A-83	Commentary on Structural Welding Code Aluminum
116	ANSI/AWS	D10.11-87	Recommended Practices for Root Pass Welding of Pipe Without Backing
117	ANSI/AWS	D10.10-90	Recommended Practices for Local Heating of Welds in Piping and Tubing
118	ANSI/AWS	D10.7-86	Recommended Practices for Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
119	ANSI/AWS	D14.1-85	Specification for Welding of Industrial and Mill Cranes and Others Material Handling Equipment
121	ANSI/AWS	D14.2-93	Specification for Metal Cutting Machine Tool Weldments
122	ANSI/AWS	D14.4-77	Classification and Application of Welded Joints for Machinery and Equipment
123	ANSI/AWS	D14.3-94	Specification for Welding Earthmoving and Construction Equipment
124	ANSI/AWS	D14.5-97	Specification for Welding of Processes and Press Components
125	ANSI/AWS	D14.6-96	Specification for Welding of Rotating Elements of Equipment
126	ANSI/AWS	D11.2-89	Guide for Welding Iron Castings
127	ASTM	A 193/A 193M – 01b	Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature Service
128	ASTM	A 234	Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
129	ASTM	A 194	Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
130	ASTM	A 192	Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
131	ASTM	A 106	Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
132	ASTM	A 182	Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
133	ASTM	A 181	Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
134	ASTM	A 53	Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
135	ASTM	A 105	Standard Specification for Carbon Steel Forgings for Piping Applications
136	ASTM	A 20	Standard Specification for General Requirements for Steel Plates for Pressure Vessels
137	ASTM	A 36	Standard Specification for Carbon Structural Steel
138	ASTM	A 6	Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
139	API	5L-2000	Specification for Line Pipe
140	API	5B-96	Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads (U.S. Customary Units)
141	ASTM	A 517	Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
142	ASTM	A 435	Standard Specification for Straight-Beam Ultrasonic Examination of Steel plates
143	ASTM	A 333	Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
144	ASTM	A 516	Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
145	ASTM	A 479	Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
146	ASTM	A 312	Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes
147	ASTM	A 320	Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service
148	ASTM	A 285	Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
149	ASTM	A 299	Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
150	ASTM	A 240	Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
151	ASTM	A 283	Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
152	ASTM	A 234	Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
153	ASTM	A 694	Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
154	ASTM	A 573	Standard Specification for Structural Carbon Steel Plates of Improved Toughness
155	ASTM	A 563	Standard Specification for Carbon and Alloy Steel Nuts
156	ASTM	A 537	Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
157	API	675-94	Positive Displacement Pumps Controlled Volume
158	API	650-98	Welded Steel Tanks for Oil Storage
159	API	1104-99	Welding of Pipelines and Related Facilities
160	API	6D-94	Specification for Pipeline Valves (Gate, Ball, and Check Valves)
161	API	620-98	Design and Construction of Large, Welded, Low-Pressure Storage Tanks
162	API	RP 520-93	Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries - part 1
163	API	17D-92	Specification for Subsea Wellhead and Christmas Tree Equipment
164	API	RP 520-93	Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries - part 2
165	API	6A-99	Specification for Wellhead and Christmas Tree Equipment
166	API	598-96	Valve Inspection and Testing
167	ASME/ANSI	B18.2.2-87	Square and Hex Nuts(Inch Series)
168	ASME/ANSI	B18.2.1a-99	Addenda to ASME B18.2.1-96 Square and Hex Bolts and Screws (Inch Series)
169	ASME/ANSI	B31.8-99	Gas Transmission and Distribution Piping Systems
170	ASME/ANSI	B31.4-98	Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids
171	ASME/ANSI	B31.3a-2000	Addenda to ASME B31.3-99 Process Piping
172	ASME/ANSI	B31G-91	Manual for Determining the Remaining Strength of Corroded Pipelines
173	ASME/ANSI	B16.5a-1998	Addenda to ASME B16.5-1996 PIPE FLANGES AND FLANGED FITTINGS NPS 1/2 Through NPS 24
174	ASME/ANSI	B16.9-93	Factory-Made Wrought Steel Buttwelding Fittings
175	ASME/ANSI	B16.25-97	Buttwelding Ends
176	ASME/ANSI	B16.34a-1998	Addenda to ASME B16.34-1996 VALVES - FLANGED, THREADED, AND WELDING END
177	ASME/ANSI	B16.11-96	Forged Fittings, Socket-Welding and Threaded
178	NACE	RP0177-2000	Standard Recommended Practice Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
179	NACE	MR0175-2002	Standard Material Requirements Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment
180	NACE	RP0169-96	Standard Recommended Practice Control of External Corrosion on Underground or Submerged Metallic Piping Systems
181	NACE	RP0170-97	Standard Recommended Practice Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment
182	NACE	RP0176-94	Standard Recommended Practice Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production
183	MSS	SP-44	Steel Pipeline Flanges
184	MSS	SP-58	Pipe Hangers and Supports Materials, Design and Manufacture
185	MSS	SP-53	Quality Standard for Steel Castings and Forgings for Valves, Flanges and Fittings and other Piping Components - Magnetic Particle Examination Method
186	MSS	SP-55	Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components Visual Method
187	MSS	SP-25-1993	Standard Marking System for Valves, Fittings, Flanges and Unions
188	MSS	SP-42	Class 150 Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends
189	MSS	SP-43	Wrought Stainless Steel Butt-Welding Fittings
190	MSS	SP-45	Bypass and Drain Connections
191	MSS	SP-51	Class 150 LW Corrosion Resistant Cast Flanges and Flanged Fittings
192	MSS	SP-53	Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components — Magnetic Particle Examination Method
193	MSS	SP-54	Quality Standard for Steel Castings for Valves, Flanges and Fittings and Other Piping Components — Radiographic Examination Method
194	MSS	SP-58	Pipe Hangers and Supports — Materials, Design and Manufacture
195	MSS	SP-60	Connecting Flange Joint Between Tapping Sleeves and Tapping Valves
196	MSS	SP-61	Pressure Testing of Steel Valves
197	MSS	SP-65	High Pressure Chemical Industry Flanges and Threaded Stubs for Use with Lens Gaskets
198	MSS	SP-67	Butterfly Valves
199	MSS	SP-70	Cast Iron Gate Valves, Flanged and Threaded Ends
200	MSS	SP-72	Ball Valves with Flanged or Butt-Welding Ends for General Service
201	MSS	SP-75	Specifications for High Test Wrought Butt Welding Fittings
202	MSS	SP-77	Guidelines for Pipe Support Contractual Relationships
203	MSS	SP-78	Cast Iron Plug Valves, Flanged and Threaded Ends
204	MSS	SP-79	Socket-Welding Reducer Inserts
205	MSS	SP-81	Stainless Steel, Bonnetless, Flanged Knife Gate Valves
206	MSS	SP-82	Valve Pressure Testing Methods
207	MSS	SP-83	Steel Pipe Unions, Socket-Welding and Threaded
208	MSS	SP-85	Cast Iron Globe & Angle Valves, Flanged and Threaded Ends
209	MSS	SP-87	Factory-Made Butt-Welding Fittings for Class I Nuclear Piping Applications
210	MSS	SP-88	Diaphragm Type Valves
211	MSS	SP-90	Guidelines on Terminology for Pipe Hangers and Supports
212	MSS	SP-91	Guidelines for Manual Operation of Valves
213	MSS	SP-92	MSS Valve User Guide
214	MSS	SP-93	Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components — Liquid Penetrant Examination Method
215	MSS	SP-94	Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, and Fittings and Other Piping Components — Ultrasonic Examination Method
216	MSS	SP-95	Swage(d) Nipples and Bull Plugs
217	MSS	SP-97	Forged Carbon Steel Branch Outlet Fittings — Socket Welding, Threaded and Buttwelding Ends
218	MSS	SP-99	Instrument Valves
219	MSS	SP-101	Part-Turn Valve Actuator Attachment— Flange and Driving Component Dimensions and Performance Characteristics
220	MSS	SP-102	Multi-Turn Valve Actuator Attachment — Flange and Driving Component Dimensions and Performance Characteristics
221	MSS	SP-103	Wrought Copper and Copper Alloy Insert Fittings for Polybutylene Systems
222	MSS	SP-104	Wrought Copper Solder Joint Pressure Fittings
223	MSS	SP-105	Instrument Valves for Code Applications
224	MSS	SP-106	Cast Copper Alloy Flanges and Flanged Fittings, Class 125, 150 and 300
225	MSS	SP-107	Transition Union Fittings for Joining Metal and Plastic Products
226	MSS	SP-108	Resilient Seated-Eccentric Cast Iron Plug Valves
227	MSS	SP-112	Quality Standard for Evaluation of Cast Surface Finishes — Visual and Tactile Method. This SP must be sold with a 10-surface, three-dimensional Cast Surface Comparator, which is a necessary part of the Standard. Additional comparators may be sold separately.
228	MSS	SP-113	Connecting Joint between Tapping Machines and Tapping Valves
229	MSS	SP-114	Corrosion Resistant Pipe Fittings Threaded and Socket Welding Class 150 and 1000
230	MSS	SP-115	Excess Flow Valves for Natural Gas Service
231	MSS	SP-60	Connecting Flange Joint between Tapping Sleeves and Tapping Valves
232	MSS	SP-91	Guidelines for Manual Operation of Valves
233	MSS	SP-93	Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other Piping Components — Liquid Penetrant Examination Method
234	ASME	A13.1	SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS
235	ASME	B1.16M	Gages and Gaging for Metric M Screw Threads
236	ASME	B1.15	Unified Inch Screw Threads (UNJ Thread Form)
237	ASME	B1.20.1	PIPE THREADS, GENERAL PURPOSE (INCH)
238	ASME	A13.1	SCHEME FOR THE IDENTIFICATION OF PIPING SYSTEMS
239	ASME	B1.3M	Screw Thread Gaging Systems for Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ)
120	ANSI/AWS	D10.13-95	Recommended Practices for the Brazing of Copper Pipe and Tubing for Medical Gas Systems
240	ASME	B1.7M	Nomenclature, Definitions, and Letter Symbols for Screw Threads
241	ASME	B1.2	Gages and Gaging for Unified Inch Screw Threads
242	ASME	B1.1	Unified Inch Screw Threads (UN and UNR Thread Form)
243	ASME	NQA-1 - 1997	QUALITY ASSURANCE REQUIREMENTS FOR NUCLEAR FACILITY APPLICATIONS
244	ASME	B1.20.3	Dryseal Pipe Threads (Inch)
245	ASME	AS-11	Personnel of Codes, Standards, and Related Accreditation Registration, and Certification Committees
246	ASME	B16.11-1996	FORGED FITTINGS, SOCKET-WELDING AND THREADED
247	ASME	B1.20.5	GAGING FOR DRYSEAL PIPE THREADS (INCH)
248	ASME	B16.12	Cast Iron Threaded Drainage Fittings
249	ASME	B16.10	Face-to-Face and End-to-End Dimensions of Valves
250	ASME	B16.9	Factory-Made Wrought Steel Buttwelding Fittings
251	ASME	B16.4	Cast Iron Threaded Fittings
252	ASME	B16.1	Cast Iron Pipe Flanges and Flanged Fittings
253	ASME	B4.2	Preferred Metric Limits and Fits
254	ASME	B16.3	Malleable Iron Threaded Fittings
255	ASME	B1.22M	Gages and Gaging for MJ Series Metric Screw Threads
256	ASME	B1.21M	METRIC SCREW THREADS: MJ PROFILE
257	ASME	B1.20.7	HOSE COUPLING SCREW THREADS (INCH)
258	ASME	Y14.36M	SURFACE TEXTURE SYMBOLS
259	ASME	Y14.5M	Dimensioning and Tolerancing
260	ASME	Y14.5.1M	Mathematical Definition of Dimensioning and Tolerancing Principles
261	ASME	SPPE-2	Accreditation of Testing Laboratories for Safety and Pollution Prevention Equipment Used in Offshore Oil and Gas Operations
262	ASME	PTC 25	Pressure Relief Devices
263	ASME	PTC 19.2	PART 2: Pressure Measurement INSTRUMENTS AND APPARATUS
264	ASME	B31G	Manual for Determining the Remaining Strength of Corroded Pipelines